NAME SQL::Abstract - Generate SQL from Perl data structures SYNOPSIS use SQL::Abstract; my $sql = SQL::Abstract->new; my($stmt, @bind) = $sql->select($source, \@fields, \%where, $order); my($stmt, @bind) = $sql->insert($table, \%fieldvals || \@values); my($stmt, @bind) = $sql->update($table, \%fieldvals, \%where); my($stmt, @bind) = $sql->delete($table, \%where); # Then, use these in your DBI statements my $sth = $dbh->prepare($stmt); $sth->execute(@bind); # Just generate the WHERE clause my($stmt, @bind) = $sql->where(\%where, $order); # Return values in the same order, for hashed queries # See PERFORMANCE section for more details my @bind = $sql->values(\%fieldvals); DESCRIPTION This module was inspired by the excellent DBIx::Abstract. However, in using that module I found that what I really wanted to do was generate SQL, but still retain complete control over my statement handles and use the DBI interface. So, I set out to create an abstract SQL generation module. While based on the concepts used by DBIx::Abstract, there are several important differences, especially when it comes to WHERE clauses. I have modified the concepts used to make the SQL easier to generate from Perl data structures and, IMO, more intuitive. The underlying idea is for this module to do what you mean, based on the data structures you provide it. The big advantage is that you don't have to modify your code every time your data changes, as this module figures it out. To begin with, an SQL INSERT is as easy as just specifying a hash of "key=value" pairs: my %data = ( name => 'Jimbo Bobson', phone => '123-456-7890', address => '42 Sister Lane', city => 'St. Louis', state => 'Louisiana', ); The SQL can then be generated with this: my($stmt, @bind) = $sql->insert('people', \%data); Which would give you something like this: $stmt = "INSERT INTO people (address, city, name, phone, state) VALUES (?, ?, ?, ?, ?)"; @bind = ('42 Sister Lane', 'St. Louis', 'Jimbo Bobson', '123-456-7890', 'Louisiana'); These are then used directly in your DBI code: my $sth = $dbh->prepare($stmt); $sth->execute(@bind); Inserting and Updating Arrays If your database has array types (like for example Postgres), activate the special option "array_datatypes => 1" when creating the "SQL::Abstract" object. Then you may use an arrayref to insert and update database array types: my $sql = SQL::Abstract->new(array_datatypes => 1); my %data = ( planets => [qw/Mercury Venus Earth Mars/] ); my($stmt, @bind) = $sql->insert('solar_system', \%data); This results in: $stmt = "INSERT INTO solar_system (planets) VALUES (?)" @bind = (['Mercury', 'Venus', 'Earth', 'Mars']); Inserting and Updating SQL In order to apply SQL functions to elements of your %data you may specify a reference to an arrayref for the given hash value. For example, if you need to execute the Oracle "to_date" function on a value, you can say something like this: my %data = ( name => 'Bill', date_entered => \[ "to_date(?,'MM/DD/YYYY')", "03/02/2003" ], ); The first value in the array is the actual SQL. Any other values are optional and would be included in the bind values array. This gives you: my($stmt, @bind) = $sql->insert('people', \%data); $stmt = "INSERT INTO people (name, date_entered) VALUES (?, to_date(?,'MM/DD/YYYY'))"; @bind = ('Bill', '03/02/2003'); An UPDATE is just as easy, all you change is the name of the function: my($stmt, @bind) = $sql->update('people', \%data); Notice that your %data isn't touched; the module will generate the appropriately quirky SQL for you automatically. Usually you'll want to specify a WHERE clause for your UPDATE, though, which is where handling %where hashes comes in handy... Complex where statements This module can generate pretty complicated WHERE statements easily. For example, simple "key=value" pairs are taken to mean equality, and if you want to see if a field is within a set of values, you can use an arrayref. Let's say we wanted to SELECT some data based on this criteria: my %where = ( requestor => 'inna', worker => ['nwiger', 'rcwe', 'sfz'], status => { '!=', 'completed' } ); my($stmt, @bind) = $sql->select('tickets', '*', \%where); The above would give you something like this: $stmt = "SELECT * FROM tickets WHERE ( requestor = ? ) AND ( status != ? ) AND ( worker = ? OR worker = ? OR worker = ? )"; @bind = ('inna', 'completed', 'nwiger', 'rcwe', 'sfz'); Which you could then use in DBI code like so: my $sth = $dbh->prepare($stmt); $sth->execute(@bind); Easy, eh? METHODS The methods are simple. There's one for every major SQL operation, and a constructor you use first. The arguments are specified in a similar order for each method (table, then fields, then a where clause) to try and simplify things. new(option => 'value') The "new()" function takes a list of options and values, and returns a new SQL::Abstract object which can then be used to generate SQL through the methods below. The options accepted are: case If set to 'lower', then SQL will be generated in all lowercase. By default SQL is generated in "textbook" case meaning something like: SELECT a_field FROM a_table WHERE some_field LIKE '%someval%' Any setting other than 'lower' is ignored. cmp This determines what the default comparison operator is. By default it is "=", meaning that a hash like this: %where = (name => 'nwiger', email => 'nate@wiger.org'); Will generate SQL like this: WHERE name = 'nwiger' AND email = 'nate@wiger.org' However, you may want loose comparisons by default, so if you set "cmp" to "like" you would get SQL such as: WHERE name like 'nwiger' AND email like 'nate@wiger.org' You can also override the comparison on an individual basis - see the huge section on "WHERE CLAUSES" at the bottom. sqltrue, sqlfalse Expressions for inserting boolean values within SQL statements. By default these are "1=1" and "1=0". They are used by the special operators "-in" and "-not_in" for generating correct SQL even when the argument is an empty array (see below). logic This determines the default logical operator for multiple WHERE statements in arrays or hashes. If absent, the default logic is "or" for arrays, and "and" for hashes. This means that a WHERE array of the form: @where = ( event_date => {'>=', '2/13/99'}, event_date => {'<=', '4/24/03'}, ); will generate SQL like this: WHERE event_date >= '2/13/99' OR event_date <= '4/24/03' This is probably not what you want given this query, though (look at the dates). To change the "OR" to an "AND", simply specify: my $sql = SQL::Abstract->new(logic => 'and'); Which will change the above "WHERE" to: WHERE event_date >= '2/13/99' AND event_date <= '4/24/03' The logic can also be changed locally by inserting a modifier in front of an arrayref: @where = (-and => [event_date => {'>=', '2/13/99'}, event_date => {'<=', '4/24/03'} ]); See the "WHERE CLAUSES" section for explanations. convert This will automatically convert comparisons using the specified SQL function for both column and value. This is mostly used with an argument of "upper" or "lower", so that the SQL will have the effect of case-insensitive "searches". For example, this: $sql = SQL::Abstract->new(convert => 'upper'); %where = (keywords => 'MaKe iT CAse inSeNSItive'); Will turn out the following SQL: WHERE upper(keywords) like upper('MaKe iT CAse inSeNSItive') The conversion can be "upper()", "lower()", or any other SQL function that can be applied symmetrically to fields (actually SQL::Abstract does not validate this option; it will just pass through what you specify verbatim). bindtype This is a kludge because many databases suck. For example, you can't just bind values using DBI's "execute()" for Oracle "CLOB" or "BLOB" fields. Instead, you have to use "bind_param()": $sth->bind_param(1, 'reg data'); $sth->bind_param(2, $lots, {ora_type => ORA_CLOB}); The problem is, SQL::Abstract will normally just return a @bind array, which loses track of which field each slot refers to. Fear not. If you specify "bindtype" in new, you can determine how @bind is returned. Currently, you can specify either "normal" (default) or "columns". If you specify "columns", you will get an array that looks like this: my $sql = SQL::Abstract->new(bindtype => 'columns'); my($stmt, @bind) = $sql->insert(...); @bind = ( [ 'column1', 'value1' ], [ 'column2', 'value2' ], [ 'column3', 'value3' ], ); You can then iterate through this manually, using DBI's "bind_param()". $sth->prepare($stmt); my $i = 1; for (@bind) { my($col, $data) = @$_; if ($col eq 'details' || $col eq 'comments') { $sth->bind_param($i, $data, {ora_type => ORA_CLOB}); } elsif ($col eq 'image') { $sth->bind_param($i, $data, {ora_type => ORA_BLOB}); } else { $sth->bind_param($i, $data); } $i++; } $sth->execute; # execute without @bind now Now, why would you still use SQL::Abstract if you have to do this crap? Basically, the advantage is still that you don't have to care which fields are or are not included. You could wrap that above "for" loop in a simple sub called "bind_fields()" or something and reuse it repeatedly. You still get a layer of abstraction over manual SQL specification. Note that if you set "bindtype" to "columns", the "\[ $sql, @bind ]" construct (see "Literal SQL with placeholders and bind values (subqueries)") will expect the bind values in this format. quote_char This is the character that a table or column name will be quoted with. By default this is an empty string, but you could set it to the character "`", to generate SQL like this: SELECT `a_field` FROM `a_table` WHERE `some_field` LIKE '%someval%' Alternatively, you can supply an array ref of two items, the first being the left hand quote character, and the second the right hand quote character. For example, you could supply "['[',']']" for SQL Server 2000 compliant quotes that generates SQL like this: SELECT [a_field] FROM [a_table] WHERE [some_field] LIKE '%someval%' Quoting is useful if you have tables or columns names that are reserved words in your database's SQL dialect. escape_char This is the character that will be used to escape "quote_char"s appearing in an identifier before it has been quoted. The parameter default in case of a single "quote_char" character is the quote character itself. When opening-closing-style quoting is used ("quote_char" is an arrayref) this parameter defaults to the closing (right) "quote_char". Occurrences of the opening (left) "quote_char" within the identifier are currently left untouched. The default for opening-closing-style quotes may change in future versions, thus you are strongly encouraged to specify the escape character explicitly. name_sep This is the character that separates a table and column name. It is necessary to specify this when the "quote_char" option is selected, so that tables and column names can be individually quoted like this: SELECT `table`.`one_field` FROM `table` WHERE `table`.`other_field` = 1 injection_guard A regular expression "qr/.../" that is applied to any "-function" and unquoted column name specified in a query structure. This is a safety mechanism to avoid injection attacks when mishandling user input e.g.: my %condition_as_column_value_pairs = get_values_from_user(); $sqla->select( ... , \%condition_as_column_value_pairs ); If the expression matches an exception is thrown. Note that literal SQL supplied via "\'...'" or "\['...']" is not checked in any way. Defaults to checking for ";" and the "GO" keyword (TransactSQL) array_datatypes When this option is true, arrayrefs in INSERT or UPDATE are interpreted as array datatypes and are passed directly to the DBI layer. When this option is false, arrayrefs are interpreted as literal SQL, just like refs to arrayrefs (but this behavior is for backwards compatibility; when writing new queries, use the "reference to arrayref" syntax for literal SQL). special_ops Takes a reference to a list of "special operators" to extend the syntax understood by SQL::Abstract. See section "SPECIAL OPERATORS" for details. unary_ops Takes a reference to a list of "unary operators" to extend the syntax understood by SQL::Abstract. See section "UNARY OPERATORS" for details. insert($table, \@values || \%fieldvals, \%options) This is the simplest function. You simply give it a table name and either an arrayref of values or hashref of field/value pairs. It returns an SQL INSERT statement and a list of bind values. See the sections on "Inserting and Updating Arrays" and "Inserting and Updating SQL" for information on how to insert with those data types. The optional "\%options" hash reference may contain additional options to generate the insert SQL. Currently supported options are: returning Takes either a scalar of raw SQL fields, or an array reference of field names, and adds on an SQL "RETURNING" statement at the end. This allows you to return data generated by the insert statement (such as row IDs) without performing another "SELECT" statement. Note, however, this is not part of the SQL standard and may not be supported by all database engines. update($table, \%fieldvals, \%where, \%options) This takes a table, hashref of field/value pairs, and an optional hashref WHERE clause. It returns an SQL UPDATE function and a list of bind values. See the sections on "Inserting and Updating Arrays" and "Inserting and Updating SQL" for information on how to insert with those data types. The optional "\%options" hash reference may contain additional options to generate the update SQL. Currently supported options are: returning See the "returning" option to insert. select($source, $fields, $where, $order) This returns a SQL SELECT statement and associated list of bind values, as specified by the arguments: $source Specification of the 'FROM' part of the statement. The argument can be either a plain scalar (interpreted as a table name, will be quoted), or an arrayref (interpreted as a list of table names, joined by commas, quoted), or a scalarref (literal SQL, not quoted). $fields Specification of the list of fields to retrieve from the source. The argument can be either an arrayref (interpreted as a list of field names, will be joined by commas and quoted), or a plain scalar (literal SQL, not quoted). Please observe that this API is not as flexible as that of the first argument $source, for backwards compatibility reasons. $where Optional argument to specify the WHERE part of the query. The argument is most often a hashref, but can also be an arrayref or plain scalar -- see section WHERE clause for details. $order Optional argument to specify the ORDER BY part of the query. The argument can be a scalar, a hashref or an arrayref -- see section ORDER BY clause for details. delete($table, \%where, \%options) This takes a table name and optional hashref WHERE clause. It returns an SQL DELETE statement and list of bind values. The optional "\%options" hash reference may contain additional options to generate the delete SQL. Currently supported options are: returning See the "returning" option to insert. where(\%where, $order) This is used to generate just the WHERE clause. For example, if you have an arbitrary data structure and know what the rest of your SQL is going to look like, but want an easy way to produce a WHERE clause, use this. It returns an SQL WHERE clause and list of bind values. values(\%data) This just returns the values from the hash %data, in the same order that would be returned from any of the other above queries. Using this allows you to markedly speed up your queries if you are affecting lots of rows. See below under the "PERFORMANCE" section. generate($any, 'number', $of, \@data, $struct, \%types) Warning: This is an experimental method and subject to change. This returns arbitrarily generated SQL. It's a really basic shortcut. It will return two different things, depending on return context: my($stmt, @bind) = $sql->generate('create table', \$table, \@fields); my $stmt_and_val = $sql->generate('create table', \$table, \@fields); These would return the following: # First calling form $stmt = "CREATE TABLE test (?, ?)"; @bind = (field1, field2); # Second calling form $stmt_and_val = "CREATE TABLE test (field1, field2)"; Depending on what you're trying to do, it's up to you to choose the correct format. In this example, the second form is what you would want. By the same token: $sql->generate('alter session', { nls_date_format => 'MM/YY' }); Might give you: ALTER SESSION SET nls_date_format = 'MM/YY' You get the idea. Strings get their case twiddled, but everything else remains verbatim. EXPORTABLE FUNCTIONS is_plain_value Determines if the supplied argument is a plain value as understood by this module: * The value is "undef" * The value is a non-reference * The value is an object with stringification overloading * The value is of the form "{ -value => $anything }" On failure returns "undef", on success returns a scalar reference to the original supplied argument. * Note The stringification overloading detection is rather advanced: it takes into consideration not only the presence of a "" overload, but if that fails also checks for enabled autogenerated versions of "", based on either "0+" or "bool". Unfortunately testing in the field indicates that this detection may tickle a latent bug in perl versions before 5.018, but only when very large numbers of stringifying objects are involved. At the time of writing ( Sep 2014 ) there is no clear explanation of the direct cause, nor is there a manageably small test case that reliably reproduces the problem. If you encounter any of the following exceptions in random places within your application stack - this module may be to blame: Operation "ne": no method found, left argument in overloaded package , right argument in overloaded package or perhaps even Stub found while resolving method "???" overloading """" in package If you fall victim to the above - please attempt to reduce the problem to something that could be sent to the SQL::Abstract developers (either publicly or privately). As a workaround in the meantime you can set $ENV{SQLA_ISVALUE_IGNORE_AUTOGENERATED_STRINGIFICATION} to a true value, which will most likely eliminate your problem (at the expense of not being able to properly detect exotic forms of stringification). This notice and environment variable will be removed in a future version, as soon as the underlying problem is found and a reliable workaround is devised. is_literal_value Determines if the supplied argument is a literal value as understood by this module: * "\$sql_string" * "\[ $sql_string, @bind_values ]" On failure returns "undef", on success returns an array reference containing the unpacked version of the supplied literal SQL and bind values. WHERE CLAUSES Introduction This module uses a variation on the idea from DBIx::Abstract. It is NOT, repeat *not* 100% compatible. The main logic of this module is that things in arrays are OR'ed, and things in hashes are AND'ed. The easiest way to explain is to show lots of examples. After each %where hash shown, it is assumed you used: my($stmt, @bind) = $sql->where(\%where); However, note that the %where hash can be used directly in any of the other functions as well, as described above. Key-value pairs So, let's get started. To begin, a simple hash: my %where = ( user => 'nwiger', status => 'completed' ); Is converted to SQL "key = val" statements: $stmt = "WHERE user = ? AND status = ?"; @bind = ('nwiger', 'completed'); One common thing I end up doing is having a list of values that a field can be in. To do this, simply specify a list inside of an arrayref: my %where = ( user => 'nwiger', status => ['assigned', 'in-progress', 'pending']; ); This simple code will create the following: $stmt = "WHERE user = ? AND ( status = ? OR status = ? OR status = ? )"; @bind = ('nwiger', 'assigned', 'in-progress', 'pending'); A field associated to an empty arrayref will be considered a logical false and will generate 0=1. Tests for NULL values If the value part is "undef" then this is converted to SQL my %where = ( user => 'nwiger', status => undef, ); becomes: $stmt = "WHERE user = ? AND status IS NULL"; @bind = ('nwiger'); To test if a column IS NOT NULL: my %where = ( user => 'nwiger', status => { '!=', undef }, ); Specific comparison operators If you want to specify a different type of operator for your comparison, you can use a hashref for a given column: my %where = ( user => 'nwiger', status => { '!=', 'completed' } ); Which would generate: $stmt = "WHERE user = ? AND status != ?"; @bind = ('nwiger', 'completed'); To test against multiple values, just enclose the values in an arrayref: status => { '=', ['assigned', 'in-progress', 'pending'] }; Which would give you: "WHERE status = ? OR status = ? OR status = ?" The hashref can also contain multiple pairs, in which case it is expanded into an "AND" of its elements: my %where = ( user => 'nwiger', status => { '!=', 'completed', -not_like => 'pending%' } ); # Or more dynamically, like from a form $where{user} = 'nwiger'; $where{status}{'!='} = 'completed'; $where{status}{'-not_like'} = 'pending%'; # Both generate this $stmt = "WHERE user = ? AND status != ? AND status NOT LIKE ?"; @bind = ('nwiger', 'completed', 'pending%'); To get an OR instead, you can combine it with the arrayref idea: my %where => ( user => 'nwiger', priority => [ { '=', 2 }, { '>', 5 } ] ); Which would generate: $stmt = "WHERE ( priority = ? OR priority > ? ) AND user = ?"; @bind = ('2', '5', 'nwiger'); If you want to include literal SQL (with or without bind values), just use a scalar reference or reference to an arrayref as the value: my %where = ( date_entered => { '>' => \["to_date(?, 'MM/DD/YYYY')", "11/26/2008"] }, date_expires => { '<' => \"now()" } ); Which would generate: $stmt = "WHERE date_entered > to_date(?, 'MM/DD/YYYY') AND date_expires < now()"; @bind = ('11/26/2008'); Logic and nesting operators In the example above, there is a subtle trap if you want to say something like this (notice the "AND"): WHERE priority != ? AND priority != ? Because, in Perl you *can't* do this: priority => { '!=' => 2, '!=' => 1 } As the second "!=" key will obliterate the first. The solution is to use the special "-modifier" form inside an arrayref: priority => [ -and => {'!=', 2}, {'!=', 1} ] Normally, these would be joined by "OR", but the modifier tells it to use "AND" instead. (Hint: You can use this in conjunction with the "logic" option to "new()" in order to change the way your queries work by default.) Important: Note that the "-modifier" goes INSIDE the arrayref, as an extra first element. This will NOT do what you think it might: priority => -and => [{'!=', 2}, {'!=', 1}] # WRONG! Here is a quick list of equivalencies, since there is some overlap: # Same status => {'!=', 'completed', 'not like', 'pending%' } status => [ -and => {'!=', 'completed'}, {'not like', 'pending%'}] # Same status => {'=', ['assigned', 'in-progress']} status => [ -or => {'=', 'assigned'}, {'=', 'in-progress'}] status => [ {'=', 'assigned'}, {'=', 'in-progress'} ] Special operators: IN, BETWEEN, etc. You can also use the hashref format to compare a list of fields using the "IN" comparison operator, by specifying the list as an arrayref: my %where = ( status => 'completed', reportid => { -in => [567, 2335, 2] } ); Which would generate: $stmt = "WHERE status = ? AND reportid IN (?,?,?)"; @bind = ('completed', '567', '2335', '2'); The reverse operator "-not_in" generates SQL "NOT IN" and is used in the same way. If the argument to "-in" is an empty array, 'sqlfalse' is generated (by default: "1=0"). Similarly, "-not_in => []" generates 'sqltrue' (by default: "1=1"). In addition to the array you can supply a chunk of literal sql or literal sql with bind: my %where = { customer => { -in => \[ 'SELECT cust_id FROM cust WHERE balance > ?', 2000, ], status => { -in => \'SELECT status_codes FROM states' }, }; would generate: $stmt = "WHERE ( customer IN ( SELECT cust_id FROM cust WHERE balance > ? ) AND status IN ( SELECT status_codes FROM states ) )"; @bind = ('2000'); Finally, if the argument to "-in" is not a reference, it will be treated as a single-element array. Another pair of operators is "-between" and "-not_between", used with an arrayref of two values: my %where = ( user => 'nwiger', completion_date => { -not_between => ['2002-10-01', '2003-02-06'] } ); Would give you: WHERE user = ? AND completion_date NOT BETWEEN ( ? AND ? ) Just like with "-in" all plausible combinations of literal SQL are possible: my %where = { start0 => { -between => [ 1, 2 ] }, start1 => { -between => \["? AND ?", 1, 2] }, start2 => { -between => \"lower(x) AND upper(y)" }, start3 => { -between => [ \"lower(x)", \["upper(?)", 'stuff' ], ] }, }; Would give you: $stmt = "WHERE ( ( start0 BETWEEN ? AND ? ) AND ( start1 BETWEEN ? AND ? ) AND ( start2 BETWEEN lower(x) AND upper(y) ) AND ( start3 BETWEEN lower(x) AND upper(?) ) )"; @bind = (1, 2, 1, 2, 'stuff'); These are the two builtin "special operators"; but the list can be expanded: see section "SPECIAL OPERATORS" below. Unary operators: bool If you wish to test against boolean columns or functions within your database you can use the "-bool" and "-not_bool" operators. For example to test the column "is_user" being true and the column "is_enabled" being false you would use:- my %where = ( -bool => 'is_user', -not_bool => 'is_enabled', ); Would give you: WHERE is_user AND NOT is_enabled If a more complex combination is required, testing more conditions, then you should use the and/or operators:- my %where = ( -and => [ -bool => 'one', -not_bool => { two=> { -rlike => 'bar' } }, -not_bool => { three => [ { '=', 2 }, { '>', 5 } ] }, ], ); Would give you: WHERE one AND (NOT two RLIKE ?) AND (NOT ( three = ? OR three > ? )) Nested conditions, -and/-or prefixes So far, we've seen how multiple conditions are joined with a top-level "AND". We can change this by putting the different conditions we want in hashes and then putting those hashes in an array. For example: my @where = ( { user => 'nwiger', status => { -like => ['pending%', 'dispatched'] }, }, { user => 'robot', status => 'unassigned', } ); This data structure would create the following: $stmt = "WHERE ( user = ? AND ( status LIKE ? OR status LIKE ? ) ) OR ( user = ? AND status = ? ) )"; @bind = ('nwiger', 'pending', 'dispatched', 'robot', 'unassigned'); Clauses in hashrefs or arrayrefs can be prefixed with an "-and" or "-or" to change the logic inside: my @where = ( -and => [ user => 'nwiger', [ -and => [ workhrs => {'>', 20}, geo => 'ASIA' ], -or => { workhrs => {'<', 50}, geo => 'EURO' }, ], ], ); That would yield: $stmt = "WHERE ( user = ? AND ( ( workhrs > ? AND geo = ? ) OR ( workhrs < ? OR geo = ? ) ) )"; @bind = ('nwiger', '20', 'ASIA', '50', 'EURO'); Algebraic inconsistency, for historical reasons "Important note": when connecting several conditions, the "-and-"|"-or" operator goes "outside" of the nested structure; whereas when connecting several constraints on one column, the "-and" operator goes "inside" the arrayref. Here is an example combining both features: my @where = ( -and => [a => 1, b => 2], -or => [c => 3, d => 4], e => [-and => {-like => 'foo%'}, {-like => '%bar'} ] ) yielding WHERE ( ( ( a = ? AND b = ? ) OR ( c = ? OR d = ? ) OR ( e LIKE ? AND e LIKE ? ) ) ) This difference in syntax is unfortunate but must be preserved for historical reasons. So be careful: the two examples below would seem algebraically equivalent, but they are not { col => [ -and => { -like => 'foo%' }, { -like => '%bar' }, ] } # yields: WHERE ( ( col LIKE ? AND col LIKE ? ) ) [ -and => { col => { -like => 'foo%' } }, { col => { -like => '%bar' } }, ] # yields: WHERE ( ( col LIKE ? OR col LIKE ? ) ) Literal SQL and value type operators The basic premise of SQL::Abstract is that in WHERE specifications the "left side" is a column name and the "right side" is a value (normally rendered as a placeholder). This holds true for both hashrefs and arrayref pairs as you see in the "WHERE CLAUSES" examples above. Sometimes it is necessary to alter this behavior. There are several ways of doing so. -ident This is a virtual operator that signals the string to its right side is an identifier (a column name) and not a value. For example to compare two columns you would write: my %where = ( priority => { '<', 2 }, requestor => { -ident => 'submitter' }, ); which creates: $stmt = "WHERE priority < ? AND requestor = submitter"; @bind = ('2'); If you are maintaining legacy code you may see a different construct as described in "Deprecated usage of Literal SQL", please use "-ident" in new code. -value This is a virtual operator that signals that the construct to its right side is a value to be passed to DBI. This is for example necessary when you want to write a where clause against an array (for RDBMS that support such datatypes). For example: my %where = ( array => { -value => [1, 2, 3] } ); will result in: $stmt = 'WHERE array = ?'; @bind = ([1, 2, 3]); Note that if you were to simply say: my %where = ( array => [1, 2, 3] ); the result would probably not be what you wanted: $stmt = 'WHERE array = ? OR array = ? OR array = ?'; @bind = (1, 2, 3); Literal SQL Finally, sometimes only literal SQL will do. To include a random snippet of SQL verbatim, you specify it as a scalar reference. Consider this only as a last resort. Usually there is a better way. For example: my %where = ( priority => { '<', 2 }, requestor => { -in => \'(SELECT name FROM hitmen)' }, ); Would create: $stmt = "WHERE priority < ? AND requestor IN (SELECT name FROM hitmen)" @bind = (2); Note that in this example, you only get one bind parameter back, since the verbatim SQL is passed as part of the statement. CAVEAT Never use untrusted input as a literal SQL argument - this is a massive security risk (there is no way to check literal snippets for SQL injections and other nastyness). If you need to deal with untrusted input use literal SQL with placeholders as described next. Literal SQL with placeholders and bind values (subqueries) If the literal SQL to be inserted has placeholders and bind values, use a reference to an arrayref (yes this is a double reference -- not so common, but perfectly legal Perl). For example, to find a date in Postgres you can use something like this: my %where = ( date_column => \[ "= date '2008-09-30' - ?::integer", 10 ] ) This would create: $stmt = "WHERE ( date_column = date '2008-09-30' - ?::integer )" @bind = ('10'); Note that you must pass the bind values in the same format as they are returned by where. This means that if you set "bindtype" to "columns", you must provide the bind values in the "[ column_meta => value ]" format, where "column_meta" is an opaque scalar value; most commonly the column name, but you can use any scalar value (including references and blessed references), SQL::Abstract will simply pass it through intact. So if "bindtype" is set to "columns" the above example will look like: my %where = ( date_column => \[ "= date '2008-09-30' - ?::integer", [ {} => 10 ] ] ) Literal SQL is especially useful for nesting parenthesized clauses in the main SQL query. Here is a first example: my ($sub_stmt, @sub_bind) = ("SELECT c1 FROM t1 WHERE c2 < ? AND c3 LIKE ?", 100, "foo%"); my %where = ( foo => 1234, bar => \["IN ($sub_stmt)" => @sub_bind], ); This yields: $stmt = "WHERE (foo = ? AND bar IN (SELECT c1 FROM t1 WHERE c2 < ? AND c3 LIKE ?))"; @bind = (1234, 100, "foo%"); Other subquery operators, like for example "> ALL" or "NOT IN", are expressed in the same way. Of course the $sub_stmt and its associated bind values can be generated through a former call to "select()" : my ($sub_stmt, @sub_bind) = $sql->select("t1", "c1", {c2 => {"<" => 100}, c3 => {-like => "foo%"}}); my %where = ( foo => 1234, bar => \["> ALL ($sub_stmt)" => @sub_bind], ); In the examples above, the subquery was used as an operator on a column; but the same principle also applies for a clause within the main %where hash, like an EXISTS subquery: my ($sub_stmt, @sub_bind) = $sql->select("t1", "*", {c1 => 1, c2 => \"> t0.c0"}); my %where = ( -and => [ foo => 1234, \["EXISTS ($sub_stmt)" => @sub_bind], ]); which yields $stmt = "WHERE (foo = ? AND EXISTS (SELECT * FROM t1 WHERE c1 = ? AND c2 > t0.c0))"; @bind = (1234, 1); Observe that the condition on "c2" in the subquery refers to column "t0.c0" of the main query: this is *not* a bind value, so we have to express it through a scalar ref. Writing "c2 => {">" => "t0.c0"}" would have generated "c2 > ?" with bind value "t0.c0" ... not exactly what we wanted here. Finally, here is an example where a subquery is used for expressing unary negation: my ($sub_stmt, @sub_bind) = $sql->where({age => [{"<" => 10}, {">" => 20}]}); $sub_stmt =~ s/^ where //i; # don't want "WHERE" in the subclause my %where = ( lname => {like => '%son%'}, \["NOT ($sub_stmt)" => @sub_bind], ); This yields $stmt = "lname LIKE ? AND NOT ( age < ? OR age > ? )" @bind = ('%son%', 10, 20) Deprecated usage of Literal SQL Below are some examples of archaic use of literal SQL. It is shown only as reference for those who deal with legacy code. Each example has a much better, cleaner and safer alternative that users should opt for in new code. * my %where = ( requestor => \'IS NOT NULL' ) $stmt = "WHERE requestor IS NOT NULL" This used to be the way of generating NULL comparisons, before the handling of "undef" got formalized. For new code please use the superior syntax as described in "Tests for NULL values". * my %where = ( requestor => \'= submitter' ) $stmt = "WHERE requestor = submitter" This used to be the only way to compare columns. Use the superior "-ident" method for all new code. For example an identifier declared in such a way will be properly quoted if "quote_char" is properly set, while the legacy form will remain as supplied. * my %where = ( is_ready => \"", completed => { '>', '2012-12-21' } ) $stmt = "WHERE completed > ? AND is_ready" @bind = ('2012-12-21') Using an empty string literal used to be the only way to express a boolean. For all new code please use the much more readable -bool operator. Conclusion These pages could go on for a while, since the nesting of the data structures this module can handle are pretty much unlimited (the module implements the "WHERE" expansion as a recursive function internally). Your best bet is to "play around" with the module a little to see how the data structures behave, and choose the best format for your data based on that. And of course, all the values above will probably be replaced with variables gotten from forms or the command line. After all, if you knew everything ahead of time, you wouldn't have to worry about dynamically-generating SQL and could just hardwire it into your script. ORDER BY CLAUSES Some functions take an order by clause. This can either be a scalar (just a column name), a hashref of "{ -desc => 'col' }" or "{ -asc => 'col' }", a scalarref, an arrayref-ref, or an arrayref of any of the previous forms. Examples: Given | Will Generate --------------------------------------------------------------- | 'colA' | ORDER BY colA | [qw/colA colB/] | ORDER BY colA, colB | {-asc => 'colA'} | ORDER BY colA ASC | {-desc => 'colB'} | ORDER BY colB DESC | ['colA', {-asc => 'colB'}] | ORDER BY colA, colB ASC | { -asc => [qw/colA colB/] } | ORDER BY colA ASC, colB ASC | \'colA DESC' | ORDER BY colA DESC | \[ 'FUNC(colA, ?)', $x ] | ORDER BY FUNC(colA, ?) | /* ...with $x bound to ? */ | [ | ORDER BY { -asc => 'colA' }, | colA ASC, { -desc => [qw/colB/] }, | colB DESC, { -asc => [qw/colC colD/] },| colC ASC, colD ASC, \'colE DESC', | colE DESC, \[ 'FUNC(colF, ?)', $x ], | FUNC(colF, ?) ] | /* ...with $x bound to ? */ =============================================================== SPECIAL OPERATORS my $sqlmaker = SQL::Abstract->new(special_ops => [ { regex => qr/.../, handler => sub { my ($self, $field, $op, $arg) = @_; ... }, }, { regex => qr/.../, handler => 'method_name', }, ]); A "special operator" is a SQL syntactic clause that can be applied to a field, instead of a usual binary operator. For example: WHERE field IN (?, ?, ?) WHERE field BETWEEN ? AND ? WHERE MATCH(field) AGAINST (?, ?) Special operators IN and BETWEEN are fairly standard and therefore are builtin within "SQL::Abstract" (as the overridable methods "_where_field_IN" and "_where_field_BETWEEN"). For other operators, like the MATCH .. AGAINST example above which is specific to MySQL, you can write your own operator handlers - supply a "special_ops" argument to the "new" method. That argument takes an arrayref of operator definitions; each operator definition is a hashref with two entries: regex the regular expression to match the operator handler Either a coderef or a plain scalar method name. In both cases the expected return is "($sql, @bind)". When supplied with a method name, it is simply called on the SQL::Abstract object as: $self->$method_name($field, $op, $arg) Where: $field is the LHS of the operator $op is the part that matched the handler regex $arg is the RHS When supplied with a coderef, it is called as: $coderef->($self, $field, $op, $arg) For example, here is an implementation of the MATCH .. AGAINST syntax for MySQL my $sqlmaker = SQL::Abstract->new(special_ops => [ # special op for MySql MATCH (field) AGAINST(word1, word2, ...) {regex => qr/^match$/i, handler => sub { my ($self, $field, $op, $arg) = @_; $arg = [$arg] if not ref $arg; my $label = $self->_quote($field); my ($placeholder) = $self->_convert('?'); my $placeholders = join ", ", (($placeholder) x @$arg); my $sql = $self->_sqlcase('match') . " ($label) " . $self->_sqlcase('against') . " ($placeholders) "; my @bind = $self->_bindtype($field, @$arg); return ($sql, @bind); } }, ]); UNARY OPERATORS my $sqlmaker = SQL::Abstract->new(unary_ops => [ { regex => qr/.../, handler => sub { my ($self, $op, $arg) = @_; ... }, }, { regex => qr/.../, handler => 'method_name', }, ]); A "unary operator" is a SQL syntactic clause that can be applied to a field - the operator goes before the field You can write your own operator handlers - supply a "unary_ops" argument to the "new" method. That argument takes an arrayref of operator definitions; each operator definition is a hashref with two entries: regex the regular expression to match the operator handler Either a coderef or a plain scalar method name. In both cases the expected return is $sql. When supplied with a method name, it is simply called on the SQL::Abstract object as: $self->$method_name($op, $arg) Where: $op is the part that matched the handler regex $arg is the RHS or argument of the operator When supplied with a coderef, it is called as: $coderef->($self, $op, $arg) PERFORMANCE Thanks to some benchmarking by Mark Stosberg, it turns out that this module is many orders of magnitude faster than using "DBIx::Abstract". I must admit this wasn't an intentional design issue, but it's a byproduct of the fact that you get to control your "DBI" handles yourself. To maximize performance, use a code snippet like the following: # prepare a statement handle using the first row # and then reuse it for the rest of the rows my($sth, $stmt); for my $href (@array_of_hashrefs) { $stmt ||= $sql->insert('table', $href); $sth ||= $dbh->prepare($stmt); $sth->execute($sql->values($href)); } The reason this works is because the keys in your $href are sorted internally by SQL::Abstract. Thus, as long as your data retains the same structure, you only have to generate the SQL the first time around. On subsequent queries, simply use the "values" function provided by this module to return your values in the correct order. However this depends on the values having the same type - if, for example, the values of a where clause may either have values (resulting in sql of the form "column = ?" with a single bind value), or alternatively the values might be "undef" (resulting in sql of the form "column IS NULL" with no bind value) then the caching technique suggested will not work. FORMBUILDER If you use my "CGI::FormBuilder" module at all, you'll hopefully really like this part (I do, at least). Building up a complex query can be as simple as the following: #!/usr/bin/perl use warnings; use strict; use CGI::FormBuilder; use SQL::Abstract; my $form = CGI::FormBuilder->new(...); my $sql = SQL::Abstract->new; if ($form->submitted) { my $field = $form->field; my $id = delete $field->{id}; my($stmt, @bind) = $sql->update('table', $field, {id => $id}); } Of course, you would still have to connect using "DBI" to run the query, but the point is that if you make your form look like your table, the actual query script can be extremely simplistic. If you're REALLY lazy (I am), check out "HTML::QuickTable" for a fast interface to returning and formatting data. I frequently use these three modules together to write complex database query apps in under 50 lines. HOW TO CONTRIBUTE Contributions are always welcome, in all usable forms (we especially welcome documentation improvements). The delivery methods include git- or unified-diff formatted patches, GitHub pull requests, or plain bug reports either via RT or the Mailing list. Contributors are generally granted full access to the official repository after their first several patches pass successful review. This project is maintained in a git repository. The code and related tools are accessible at the following locations: * Official repo: * Official gitweb: * GitHub mirror: * Authorized committers: CHANGES Version 1.50 was a major internal refactoring of "SQL::Abstract". Great care has been taken to preserve the *published* behavior documented in previous versions in the 1.* family; however, some features that were previously undocumented, or behaved differently from the documentation, had to be changed in order to clarify the semantics. Hence, client code that was relying on some dark areas of "SQL::Abstract" v1.* might behave differently in v1.50. The main changes are: * support for literal SQL through the "\ [ $sql, @bind ]" syntax. * support for the { operator => \"..." } construct (to embed literal SQL) * support for the { operator => \["...", @bind] } construct (to embed literal SQL with bind values) * optional support for array datatypes * defensive programming: check arguments * fixed bug with global logic, which was previously implemented through global variables yielding side-effects. Prior versions would interpret "[ {cond1, cond2}, [cond3, cond4] ]" as "(cond1 AND cond2) OR (cond3 AND cond4)". Now this is interpreted as "(cond1 AND cond2) OR (cond3 OR cond4)". * fixed semantics of _bindtype on array args * dropped the "_anoncopy" of the %where tree. No longer necessary, we just avoid shifting arrays within that tree. * dropped the "_modlogic" function ACKNOWLEDGEMENTS There are a number of individuals that have really helped out with this module. Unfortunately, most of them submitted bugs via CPAN so I have no idea who they are! But the people I do know are: Ash Berlin (order_by hash term support) Matt Trout (DBIx::Class support) Mark Stosberg (benchmarking) Chas Owens (initial "IN" operator support) Philip Collins (per-field SQL functions) Eric Kolve (hashref "AND" support) Mike Fragassi (enhancements to "BETWEEN" and "LIKE") Dan Kubb (support for "quote_char" and "name_sep") Guillermo Roditi (patch to cleanup "IN" and "BETWEEN", fix and tests for _order_by) Laurent Dami (internal refactoring, extensible list of special operators, literal SQL) Norbert Buchmuller (support for literal SQL in hashpair, misc. fixes & tests) Peter Rabbitson (rewrite of SQLA::Test, misc. fixes & tests) Oliver Charles (support for "RETURNING" after "INSERT") Thanks! SEE ALSO DBIx::Class, DBIx::Abstract, CGI::FormBuilder, HTML::QuickTable. AUTHOR Copyright (c) 2001-2007 Nathan Wiger . All Rights Reserved. This module is actively maintained by Matt Trout For support, your best bet is to try the "DBIx::Class" users mailing list. While not an official support venue, "DBIx::Class" makes heavy use of "SQL::Abstract", and as such list members there are very familiar with how to create queries. LICENSE This module is free software; you may copy this under the same terms as perl itself (either the GNU General Public License or the Artistic License)